Outer sealing element module 6.2

for single-line building entry systems basic variant 1

ESH PolySafe M6.2

Add to wish list

Outer sealing element module 6.2 - for single-line building entry systems basic variant 1

Tested according to DIN 18533

Rubber compression seal with overlying flange for integration in existing damp-proofing in buildings with cellar. With a sealing width of 80 mm, module 6.2 is able to seal both the concrete formwork of the double wall/element wall and the in-situ concrete. Module 6.2 provides a seal against both the concrete shells of the double/element wall and the pre-mixed concrete filling. This prevents rising water in the area between the element wall and the concrete filling from penetrating the core drill hole.

Facts

Advantages:

Can be installed easily and quickly on-site
Integration of existing building seals to DIN 18195 Part 4

Dimensions:

Core drill/wall sleeve ID: 99 - 103 mm
Outer diameter of flange: 160 mm
Sealing width: 80 mm

Application range:

DIN 18533 W1-E, DIN 18533 W2.1-E
Waterproof concrete stress class 1, waterproof concrete stress class 2

Material:

Rubber: EPDM
Flange: glass fibre reinforced polyamide
Flange seal: foam rubber/NBR
Press plates: stainless steel V2A (AISI 304L)
Screws and washers: stainless steel V2A (AISI 304L)

Downloads

Installation instructions

ESH PolySafe (PDF, 2MB)

Test reports

KIWA Prüfbericht ESH Polysafe (PDF, 447KB)

Data sheet & tender specification

For download of data sheet and tender specification please configurate the product in the section below and download via the symbol Download symbol

Variants

Article code	Article number	GTIN
ESH PolySafe M6.2	1910000109	4052487163552	Your download for the choosen variant: Data sheet Download (.pdf) Tender specifications Text view (.txt) Word (.docx) Quantity:

Accessories

Basic variant with inner seal - for buildings with a basement

Outer sealing element module 6.2

for single-line building entry systems basic variant 1

ESH PolySafe M6.2